MS-4GB Gantry Pipe and Plate integrated cutting machine

Short Description:

Meisar Gantry Pipe and Plateintersection cutting machine can achieve two kinds of tube and plate cutting method, can greatly save customers cost.

The machine can cut a plurality of cylinder with different direction, different diameter of intersecting line hole, meet the vertical axis and axis condition branch director and no eccentric. The machine can also cut cylinder intersection line at the end of branch pipe, meet the pipe axis and the eccentric and no eccentric director axis intersecting condition.

Send email to us Download as PDF

Product Detail

Product Tags

Features

The whole machine adopts the welded steel plate welded structure. The beam is cut by laser cutting and then welded together. The upper and lower sides of the beam are bent by 90 degrees with the steel plate, which can reduce the deformation and increase the rigidity.
The beam hanging plate is welded with 20mm steel plate, and the whole surface is processed by gantry planer to reduce the deformation of the whole surface and improve the precision.
After the whole machine is welded, firstly, the aging treatment is performed after stress aging, followed by the surface rust removal treatment. After the primer is applied, the surface is painted.

Technical parameter

Model	MS-4GB-3280	MS-4GB-3212	MS-4GB-4080	MS-4GB-4012
Overall size	3200×8000	3200×12000	4000 x 8000	4000×12000
Effective cutting range	2300 x 6000mm	2300 x 10000mm	3000 x 6000mm	3000 x 10000mm
Round tube cutting length	8000mm	12000mm	8000mm	12000mm
Cutting tube diameter	Φ50-500mm (can be customized according to customer requirements)
Operating accuracy	0.2mm/m
Pip bearing weight	≤1500KG		2000KG
Numerical control linkage number	3-axis 2 linkage
Number of supports	3 sets	4 sets	3 sets	4 sets
Tube ellipticity	≤2%
Cutting type	tandard: flame + plasma dual-purpose cutting (can be customized)
transfer method	Gear rack drive
Torch lift	≤160mm
Flame cutting thickness	Piercing thickness: 5-60mm Edge cutting thickness: 5-200mm
Plasma cutting thickness	According to the size of the plasma power supply
Gas supprfy requirements	Acetylene / propane gas pressure ≤0.1 MP
Oxygen supply requirements	Oxygen maximum pressure ≤1MP
Cutting table infrastructure	We will provide the gantry cutting table drawing for the user reference (basic equipment and H-beam by the customer to buy)