H series – closed exchange table fiber laser cutting machine
|
configuration |
B B series |
|
servo |
Fuji2.0kw*2+1.5KW*1+0.4kw*1 |
|
system |
2000 FSCUT2000 |
|
Gear reducer |
French MOTOVARIO Gear reducer |
|
Linear Guideways |
Taiwan HIWIN35-25-15 |
|
Electrical control cabinet |
Independent Electrical control cabinet |
|
Laser cutting head
|
Swiss Raytools-500-750BT210S -1000-240S -1500-BM109 2000-3000-BM111 4000-BM114 6000-BM115 8000-12000Germany PRECITEC |
|
rack |
APEX6 Taiwan VASTUN APEX6 |
|
The beam |
Heavy duty solid casting |
|
machine bed |
Plate split welding exchange table |
Note:
width range:1.5-2.5m
length range:3-8m
laser source: below 12000w (including 12000w)
Exchanging Platform:
It adopts an up and down exchange platform; The converter is responsible for controlling the exchanging motor; The machine is able to finish the platform exchanging within 15s.The Third Generation Aviation Aluminum Gantry
It is manufactured with aerospace standards and formed by 4300 tons press extrusion molding. After aging treatment, its strength can reach 6061 T6 which is the strongest strength of all gantries.
Aviation aluminum has many advantages, such as good toughness, light weight, corrosion resistance, anti-oxidation, low density, and greatly increase the processing speed.
The Segmented Rectangular Tube Welded Bed
The internal structure of the bed adopts the aircraft metal honeycomb structure, which is welded by a number of rectangular tubes.
Stiffeners are arranged inside the tubes to increase the strength and tensile strength of the bed, it also increases the resistance and stability of the guide rail so as to effectively avoid the deformation of the bed.
- High strength, stability, tensile strength, ensuring 20 years of use without distortion;
- Thickness of rectangular pipe wall is 10mm,and weights 4500 kg.
Laser cutting head, it can focus automatically
- Without manual focusingThe software automatically adjusts the focusing lens to realize automatic perforating and cutting plates of different thickness. The speed of automatically adjusting focus lens is ten times of the manual adjusting.
- Bigger adjustment rangeAdjustment range -10 mm~ +10mm, precision 0.01mm, suitable for 0 ~ 20mm different types of plates.
- Long service lifeCollimator lens and focus lens both have water-cooling heat sink which reduces the temperature of the cutting head to improve the life of the cutting head.
Meisar fiber laser cutting machine is equipped with German Atlanta rack, Japanese Yaskawa motor and German Neugart reducer.
The positioning accuracy of the machine tool can be 0.02mm and the cutting acceleration is 1.5G. The working life is up to 10 years.
QUALITY MANAGEMENT SYSTEM
Meisar CNC is one of the biggest suppliers among cutting equipment in east China. Company mainly engage in CNC laser cutting machine, CNC plasma cutting machine, CNC Pipe/Tube cutting machine, etc. Meisar CNC has 14 years history, serving more than 80 countries and regions.
Meisar CNC has strict quality control system and quality management team. Strictly adhere to the general standards of the industry and company guidelines. Implement quality monitoring from every aspect of R&D, production and after-sales of laser equipment, to ensure that each device can meet customer’s requirements.
Incoming Inspection
For every part of the machine, Meisar CNC is strictly control the quality.
Not only require suppliers to provide quality inspection reports, but also strict quality monitoring will be carried out when the parts are in the factory.
|
Laser Source Test |
Laser Head Test |
Square Track Detection |
Rack Detection |
Motor / Reducer Testing |
 |
 |
 |
 |
 |
|
The width, repetition frequency and peak power of the laser pulse are detected by using the photoelectric detectors and oscilloscope. |
Stability test and aging test for laser head. |
Testing the flatness and straightness of the track to ensure that the machine runs smoothly. |
The precision and consistency between gear and rack are mainly tested |
We will adjust the suitability of the machine through continuous empty experiments. |
Process Control
The assembly process of the machine will also affect the customer's feeling when using the machine, Therefore, in the process of machine assembly, Meisar CNC from the most basic machine bed to the final assembly of the whole machine is strictly followed by the quality management standard.
|
Machine Bed Welding |
Gantry Milling |
Guide Rack Mounting |
Other Hardware Parts Installation |
|
|
|
|
|
The bed frame is welding by 10mm thick and high strength square. |
Meisar CNC has its own gantry milling. |
The straightness of guide rack is guaranteed by using laser collimator |
we install the motor reducer strictly according to standard production process and standard |
Pre-delivery Inspection
The machine will accept a number of quality testing, respectively, from the performance, stability, fit, practical and other aspects of consideration, for non-compliance with the standard part of the arrangements for debugging and maintenance, To ensure that the final factory, the machine is in the best condition.
|
Inspection Report |
The Whole Machine Is Fitted With a Load-Free Test |
Material Shearing Test |
Machine packing |
| |
|
|
|
|
Every component of the machine, every performance, every parameter is carefully tested. |
Ensure the cutting accuracy through laser interferometer checking and 24 hours testing, And make sure the machine will be in the best condition. |
Before delivery, different metal materials will be cut, observe the cutting effect, and then adjustment according to the need |
The laser equipment requires multiple protective measures during the packing process to ensure that each component is not affected by the collision |
