Europe style for Plasma Cutting Stainless - MS-4B-7012 Gantry CNC flame&plasma cutting machine – Meisar
Europe style for Plasma Cutting Stainless - MS-4B-7012 Gantry CNC flame&plasma cutting machine – Meisar Detail:
eatures
- The whole machine adopts the welded steel plate welded structure. The beam is cut by laser cutting and then welded together. The upper and lower sides of the beam are bent by 90 degrees with the steel plate, which can reduce the deformation and increase the rigidity.
- The beam hanging plate is welded with 20mm steel plate, and the whole surface is processed by gantry planer to reduce the deformation of the whole surface and improve the precision.
- After the whole machine is welded, firstly, the aging treatment is performed after stress aging, followed by the surface rust removal treatment. After the primer is applied, the surface is painted.
Technical parameter
| Model | MS-4B (4080) | MS-4B (5012) | MS-4B (6012) | MS-4B (7012) |
| Machine structure |
Laser cutting, steel plate welding structure with heat treatment |
|||
| Effective cutting range（X/Y) | 3000 x 6000mm | 4000 x 10000mm | 5000 x 10000mm | 6000 x 10000mm |
| Lateral rail spacing | 4000mm | 5000mm | 6000mm | 7000mm |
| Longitudinal guide length | 8000mm | 12000mm | 12000mm | 12000mm |
| The number of lifts |
Standard for the double moving lift device |
|||
| Input voltage |
AV-220V Single phase AV-220V |
|||
| input power |
About 2500W |
About 3000W |
||
| Running speed |
0-10000mm/min |
|||
| Cutting type |
1, plasma cutting (with plasma power) 2, flame cutting 3, flame + plasma cutting |
|||
| Torch lift |
≤160mm |
|||
| Operating accuracy |
0.2mm/m |
|||
| Flame cutting thickness |
Piercing thickness: 5-60mm Edge cutting thickness: 5-200mm |
|||
| Plasma cutting thickness |
According to the size of the plasma power supply |
|||
| Flame automatic Ignition device |
With flame automatic ignition device function |
|||
Product detail pictures:
Related Product Guide:
How to choose a CNC plasma cutter
With reliable good quality system, great standing and perfect consumer support, the series of products and solutions produced by our organization are exported to quite a few countries and regions for Europe style for Plasma Cutting Stainless - MS-4B-7012 Gantry CNC flame&plasma cutting machine – Meisar , The product will supply to all over the world, such as: Oman, Cologne, Chile, Aiming to grow to be by far the most experienced supplier within this sector in Uganda, we keep researching on the creating procedure and raising the high quality of our principal merchandise. Till now, the merchandise list has been updated on a regular basis and attracted customers from around the globe. In depth data can be obtained in our web page and you'll be served with good quality consultant service by our after-sale team. They're about to make it possible for you to get complete acknowledge about our things and make a satisfied negotiation. Small business check out to our factory in Uganda can also be welcome at any time. Hope to obtain your inquiries to get a happy co-operation.
By Laura from Malaysia - 2018.12.25 12:43
The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!
By Nicci Hackner from Latvia - 2018.11.02 11:11
Write your message here and send it to us
