Best quality Sheet Metal Router Bits - Ms-3A Gantry CNC Cutting Plasma Machine – Meisar
Best quality Sheet Metal Router Bits - Ms-3A Gantry CNC Cutting Plasma Machine – Meisar Detail:
Technical Specification |
|
Product Name |
Gantry Flame and Plasma CNC cutting machine |
Model |
MS-3A |
Control System |
Fang Ling F2300A |
Motor |
Double motor drive |
Color |
Red,Blue,Yellow. |
Cutting Mode |
Plasma Cutting+ Flame Cutting |
Flame Cutting Gas |
Oxygen with propane or acetylene |
Plasma Torch Gas |
Compressed air/N2/O2 |
Working Area |
2400mm*6500mm |
Cutting thickness |
0-200mm |
Cutting speed |
0-6000mm/min |
Operation precision |
0.2mm/m |
Main Features:
1.CNC gantry flame cutting is mainly suitable for cutting carbon steel within 5-200mm, and steel plates above 200mm require specific air valves; air pipes; and flame cutting torches
2.Flame cutting can realize automatic ignition device; it can greatly reduce the danger caused by industrial ignition and improve work efficiency;
3.Straight single cutting torch can perform high-precision cutting of 6-200mm carbon steel plates;
4.The straight flame cutting lifting device can manually adjust the cutting nozzle and steel plate scheduling manually;
5.Flame cutting gas source uses oxygen + gas (acetylene, industrial propane liquefied gas)
6.(Depending on the thickness of the steel plate; the size of the cutting nozzle used is different, see the flame and plasma reference table below for details)
Product detail pictures:
Related Product Guide:
How to choose a CNC plasma cutter
The customer satisfaction is our primary goal. We uphold a consistent level of professionalism, quality, credibility and service for Best quality Sheet Metal Router Bits - Ms-3A Gantry CNC Cutting Plasma Machine – Meisar , The product will supply to all over the world, such as: London, panama, Hamburg, With all these supports, we can serve every customer with quality product and timely shipping with highly responsibility. Being a young growing company, we might not the best, but we are trying our best to be your good partner.
By Helen from Indonesia - 2018.09.21 11:44
Speaking of this cooperation with the Chinese manufacturer, I just want to say"well dodne", we are very satisfied.
By Eden from Guyana - 2017.11.11 11:41